SOLADECK ACCESSORIES

Positive Bus Bar
Negative Bus Bar
Power Block
ER 6 Rail Mount Terminal Block
ER 10 Rail Mount Terminal Block

Midget Fuse Holders Rail Mount
ER 6/ ER 10 End Plate Cover
Railstop
Rail Power Dist Block
Gland Fittings

Positive Bus Bar

Part #0784BB. Includes CA4–SP lug/screw and star washer. Rated to 120 amps (use with up to four midget fuse holders).

*Use to combine positive fuses. Up to four strings into one.

Back to Top

Negative Bus Bar

Part #0785BB. Includes CA4–SP lug/screw and star washer. Rated to 120 amps (use with up to four ER10 rail terminal blocks).

*Use to combine ER 10 rail mount negative terminal block. Up to four string into one.

Back to Top

Power Block

Part #1440. Rated to 600V 175 amps. Main (1) 2/0 – 14, Tap(4) 4 – 14

*Use for non-fused negative combining. Up to four strings into one.

Back to Top

ER 6 Rail Mount Terminal Block

Part #1450. Rated to 600V 30 amps. Wire #26 – 8 AWG, 8 mm wide (for clean pass through).

*Use one block per string, positive and negative pass through (eliminating wire nuts).

Back to Top

ER 10 Rail Mount Terminal Block

Part #1451. Rated to 600V 65 amps. Wire #16 – 6 AWG, 10 mm wide (for combining).

*Use one block per string negative PV (use 0785BB bus to combine blocks).

Back to Top

Midget Fuse Holders Rail Mount

Part #1452. Rated to 600V 30 amps. Wire #8 – 18 AWG.

*Use one fuse holder per string (Use 0784BB bus to combine fuse holders).

Back to Top

ER 6/ ER 10 End Plate Cover

Part #1453.

*Use to cover exposed side of last terminal block (one for positive and one for negative).

Back to Top

Railstop

Part #1454.

*Use to secure terminal blocks.

Back to Top

Rail Power Dist Block

Part #1455.

Back to Top

Gland Fittings

Part #1470. .5" NPT standard black gland with two hole seal (2 x 6 mm). Gland has one 7 mm to 10 mm hole, or use with two hole 6 mm seal.

*Includes – Two hole 6 mm seal and lock nut.

Back to Top

Gland Fittings

Part #1471. .75" NPT standard black gland with four hole seal (4 x 7 mm). Gland has one 10 mm to 15 mm hole, or use with four hole 7 mm seal.

*Includes – Four hole 7 mm seal and lock nut.

Back to Top